Arthur_Martin AKG933A7OX Manual do Utilizador descarregar pdf (Página 26)

• it is not longer than 1500 mm,

• it has no narrowing anywhere,

• it is not twisted or tighten,

• it does not get in touch with sharp

edges or corners,

• it's conditions can be easily checked.

When checking the flexible pipe make

sure:

• it does not show cracks, cuts, marks of

burnings on the two ends and on its full

length,

• the material is not hardened, but shows

its correct elasticity,

• the fastening clamps are not rusted,

• expired term is not due.

If one or more defects are visible, do not

repair the pipe, but replace it.

WARNING! When installation

is complete, make sure that the

seal of each pipe fitting does

not leak. To check the seal use

a soap solution, not a flame.

The gas supply ramp is on the rear side of

the control panel.

WARNING! Before you

connect the gas, disconnect

the appliance from the

electricity supply or switch off

the fuse in the fuse box. Close

the primary valve of the gas

supply.

Adjustment to different types of

gas

WARNING! Let only an

authorized person do the

adjustment to different types of

gas.

If the appliance is set for liquid

gas you can change it to

natural gas, with the correct

injectors.

The gas rate is adjusted to suit.

WARNING! Before you replace

the injectors, make sure that

the gas knobs are in the Off

position. Disconnect the

appliance from the electrical

supply. Let the appliance cool

down. There is a risk of injury.

The appliance is set to default

gas. To change the setting

choose a pipe holder from the

list. Always use the gasket

sealing.

A CB

A. Gas connection end

B. Natural Gas pipe holder

C. LPG pipe holder

Hob injectors replacement

Replace the injectors when you change

the gas type.

1. Remove the pan supports.

2. Remove the caps and crowns of the

burner.

3. Remove the injectors with a socket

spanner 7.

4. Replace injectors with the ones

necessary for the type of gas you use.

26

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Comentários a estes Manuais

Sem comentários