Arthur_Martin AKG633A7OX Manual do Utilizador descarregar pdf (Página 11)

CAUTION! Make sure that the

pots are placed centrally on the

burner in order to get the

maximum stability and a lower

gas consumption.

Diameters of cookware

WARNING! Use cookware with

diameters applicable to the size

of burners.

Burner Diameter of cook‐

ware (mm)

Triple Crown 160 - 240

Burner Diameter of cook‐

ware (mm)

Semi-rapid 140 - 240

Auxiliary 120 - 180

Energy saving

• If it is possible, always put the lids on

the cookware.

• When the liquid starts to boil, turn down

the flame to barely simmer the liquid.

HOB - CARE AND CLEANING

WARNING! Refer to Safety

chapters.

General information

• Clean the hob after each use.

• Always use cookware with a clean

base.

• Scratches or dark stains on the surface

have no effect on how the hob

operates.

• Use a special cleaner suitable for the

surface of the hob.

• Wash stainless steel parts with water,

and then dry them with a soft cloth.

Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, sugar and food with sugar,

otherwise, the dirt can cause damage

to the hob. Take care to avoid burns.

• Remove when the hob is sufficiently

cool: limescale rings, water rings, fat

stains, shiny metallic discoloration.

Clean the hob with a moist cloth and a

non-abrasive detergent. After cleaning,

wipe the hob dry with a soft cloth.

• To clean the enamelled parts, caps and

crowns, wash them with warm soapy

water and dry them carefully before you

put them back on.

Cleaning the spark plug

This feature is obtained through a ceramic

ignition candle with a metal electrode.

Keep these components well clean to

prevent difficult lighting and check that the

burner crown holes are not obstructed.

Pan supports

The pan supports are not

resistant to washing in a

dishwasher. They must be

washed by hand.

1. Remove the pan supports to easily

clean the hob.

Be very careful when you

replace the pan supports to

prevent the hob top from

damage.

2. After you clean the pan supports,

make sure that they are in correct

positions.

3. For the burner to operate correctly,

make sure that the arms of the pan

supports are aligned with the centre of

the burner.

Periodic maintenance

Speak to your local Authorised Service

Centre periodically to check the conditions

11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Comentários a estes Manuais

Sem comentários