Arthur_Martin AKG611A3OX Manual do Utilizador descarregar pdf (Página 25)

Adjustment to different types of

gas

WARNING! Let only an

authorized person do the

adjustment to different types of

gas.

If the appliance is set for liquid

gas you can change it to

natural gas, with the correct

injectors.

The gas rate is adjusted to suit.

WARNING! Before you replace

the injectors, make sure that

the gas knobs are in the Off

position. Disconnect the

appliance from the electrical

supply. Let the appliance cool

down. There is a risk of injury.

The appliance is set to default

gas. To change the setting

choose a pipe holder from the

list. Always use the gasket

sealing.

A CB

A. Gas connection end

B. Natural Gas pipe holder

C. LPG pipe holder

Hob injectors replacement

Replace the injectors when you change

the gas type.

1. Remove the pan supports.

2. Remove the caps and crowns of the

burner.

3. Remove the injectors with a socket

spanner 7.

4. Replace injectors with the ones

necessary for the type of gas you use.

5. Replace the rating plate (it is near the

gas supply pipe) with the one for the

new type of gas supply.

You can find this plate in

the bag supplied with the

appliance.

If the supply gas pressure is not constant

or it is different from the necessary

pressure, install an applicable pressure

adjuster on the gas supply pipe.

Adjusting the minimum gas

level on the hob burner

1. Disconnect the appliance from the

electricity.

2. Remove the knob for the hob. If there

is no access to the bypass screw

dismount the control panel before

adjustment start.

3. With a thin and flat screwdriver adjust

the bypass screw A.

The model determines the position of

the bypass screw A.

A

A

25

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Comentários a estes Manuais

Sem comentários